Buzzed Cut

Lawns should be green, lines should be straight, and your drink should be close! 

Introducing the Buzzed Cut cup holder for your mower. Keep your favorite tumbler, bottle of water, or cold can within arms reach when keeping your lawn looking better than your neighbor's. 

The Specs

• 3D printed in durable UV resistant material 
• Swivel bearing means your drink stays upright even when you turn
• TPU inserts lessen mower vibration on your drink
  

Included in Your Order

• Buzzed Cut cup holder (1)
• Bracket (1)
• Bearing (1)
• Anti vibration dampers (3)
• 1 1/2" carriage bolt (1)
• 1 1/4" carriage bolt (1)
• 7/16" Nylon insert nuts (2)

Installation

1. The Bracket and holder will come preassembled
2. Snap the bracket onto the mower at desired height with square hole up
3. Slide remaining bolt (1 1/14") through bracket, going through square hole first
4. While pressing on the head of the bolt use 7/16 wrench or socket to tighten remaining nut WARNING: Nut only needs to be tight enough to keep bracket from moving. Overtightening could cause bracket to fail.
5. Place beverage in and mow straight lines

A couple notes:

• We recommend placing 16oz. water bottles in koozies. While the holder will still function, using a koozie works way better
• When it comes to carbonated beverages, the amount of "fizz" lost will depend on your yard and how quick you whip it for the next line. In our tests there was minimal loss of "fizz" over 30min of the mower idling